Wavelink

Speakeasy Downloads Voice-Enable Applications

IMPORTANT INFORMATION: There are 2 different platforms of Wavelink Speakeasy. Please ensure that you download the version that matches the OS that the target device is running. ANDROID:
Wavelink Speakeasy for Velocity is an add-on installation for the Wavelink Velocity platform, and currently runs on the Android operating system. Install the Velocity console on the admin workstation, followed by the voice console add-on. This will allow you to voice enable your telnet modernization and Android browser projects. On the device, the standard Velocity client is required (the client version must be version 1.2.104 or newer). Install the Speakeasy for Velocity client add-on afterwards, and then deploy the desired language, voice and quality desired. You can deploy voice projects via MDM.

A license is required to use Speakeasy for Velocity and is deployed using the Wavelink license server. Make sure that the client has access to the licensing server. Reference the license server network address configured during the host profile configuration setup in the project.
Speakeasy for Velocity Certified Devices (Android)
All ARM devices currently supported by Velocity will work with Speakeasy for Velocity.Visit the Velocity software download page for a list of supported devices. Note that Speakeasy for Velocity is not currently certified for x86-based Android.
Windows CE, Windows Mobile:
Wavelink Speakeasy voice packages require the installation of Wavelink Terminal Emulation version 7.0 or newer. Please read the following information before loading Wavelink Speakeasy packages.  Wavelink Speakeasy software is to be loaded onto the mobile device via Avalanche.  You may download and use Avalanche to accomplish this. There is no license required to load these files. You must first install the TE Speech Registration Package.  Next you may install the Speech to Text Base and/or Text to Speech Base packages depending on the desired functionalities. The final step is to install the Speech to Text and/or Text to
Speech language files depending on your requirements.

At this point you are ready to create your voice scripts using the Wavelink Script editor which is accessible via the Avalanche Console.  Please reference the appropriate documents for further information. To access the Wavelink Speakeasy Demo Kit visit the Partner Portal.
Speakeasy Certified Mobile Devices WinCE, WinMobile

Устранение неполадок

По умолчанию компьютер позволяет сразу попасть в веб-интерфейс ретранслятора. Однако, если вам приходилось изменить настройки локальной сети, то сделать это у вас не получится.

Делать это необходимо только в крайнем случае (если вы не можете зайти в веб-интерфейс сразу).

1. подключите репитер к электросети, а затем подсоедините к компьютеру при помощи LAN кабеля;
2. откройте «Центр управления сетями и общим доступом» (через панель управления или трей);
3. сбоку найдите «изменения параметров адаптера»;
4. откроется папка, где необходимо щелкнуть по значку «локальная сеть», вызвать контекстное меню, а затем нажать «свойства» — настройка TCP/IPv4 (изменять нужно именно 4 версию протокола, не 6).

В открывшемся окне, пропишите следующие данные:

• IP: 192.168.1.111;
• Маска (значение по умолчанию): 255.255.255.0;
• Шлюз: 192.168.10.1.

Сохраните внесенные изменения и вновь попробуйте зайти в веб-интерфес репитера.

Speakeasy Downloads Voice-Enable Applications

IMPORTANT INFORMATION: There are 2 different platforms of Wavelink Speakeasy. Please ensure that you download the version that matches the OS that the target device is running. ANDROID:
Wavelink Speakeasy for Velocity is an add-on installation for the Wavelink Velocity platform, and currently runs on the Android operating system. Install the Velocity console on the admin workstation, followed by the voice console add-on. This will allow you to voice enable your telnet modernization and Android browser projects. On the device, the standard Velocity client is required (the client version must be version 1.2.104 or newer). Install the Speakeasy for Velocity client add-on afterwards, and then deploy the desired language, voice and quality desired. You can deploy voice projects via MDM.

A license is required to use Speakeasy for Velocity and is deployed using the Wavelink license server. Make sure that the client has access to the licensing server. Reference the license server network address configured during the host profile configuration setup in the project.
Speakeasy for Velocity Certified Devices (Android)
All ARM devices currently supported by Velocity will work with Speakeasy for Velocity.Visit the Velocity software download page for a list of supported devices. Note that Speakeasy for Velocity is not currently certified for x86-based Android.
Windows CE, Windows Mobile:
Wavelink Speakeasy voice packages require the installation of Wavelink Terminal Emulation version 7.0 or newer. Please read the following information before loading Wavelink Speakeasy packages.  Wavelink Speakeasy software is to be loaded onto the mobile device via Avalanche.  You may download and use Avalanche to accomplish this. There is no license required to load these files. You must first install the TE Speech Registration Package.  Next you may install the Speech to Text Base and/or Text to Speech Base packages depending on the desired functionalities. The final step is to install the Speech to Text and/or Text to
Speech language files depending on your requirements.

At this point you are ready to create your voice scripts using the Wavelink Script editor which is accessible via the Avalanche Console.  Please reference the appropriate documents for further information. To access the Wavelink Speakeasy Demo Kit visit the Partner Portal.
Speakeasy Certified Mobile Devices WinCE, WinMobile